Metal Primer Plus

This thin milky white coloured Primer is designed to be used on Metal, Colorbond or Klip-Lok roofs.

Its purpose is to provide a surface for the Roof Protect Membrane to adhere to, which will enhance the effectiveness of the final 2 coats of the Membrane.

About The Product

The Roof Protect Metal Primer Plus is carefully crafted using top-quality styrene acrylic, known for its exceptional adhesive properties.

This unique blend enhances the adhesion of the membrane layers, allowing for an impeccable bond between the coating and the metal roof sheet. The primer exhibits excellent etching and adhesion characteristics, making it an ideal choice for use with Colorbond and other types of metal roofing sheets.

The outstanding adhesive capabilities of this product ensure that the coating system remains durable, weather-resistant, and long-lasting.

 

Designed For

Colorbond or other metal roofs. This product is not suitable for rusty roofs. If there is rust on the roof, it’s recommended that Roof Protect Rust Inhibitor Primer is used instead.

Coverage

The coverage is approximately nine square metres per litre. Available in 15 litre drums.

Clean Up

Metal Primer Plus is easily cleaned up using water.

 

Install

  1. Inspection: A professional will inspect the roof to determine its condition and identify any issues or areas that require attention.
  2. Cleaning: The roof will be thoroughly cleaned using a high-pressure cleaner to remove dirt, debris, and other contaminants. This process may include using anti-mould or other cleaning agents as needed.
  3. Repairs: Any damaged areas or leaks will be repaired, such as replacing broken tiles, fixing flashing, repointing and resealing any gaps or cracks.
  4. Priming: One coat of primer may be applied to the surface to ensure good adhesion of the coating.
  5. Coating: 2 coats of Roof Protect roof coating will be applied to the surface using airless spray equipment, ensuring the coating is applied evenly and in the correct thickness.
  6. Finishing touches: Once the coating is applied, any necessary finishing touches will be made, such as painting trim and flashing or adding anti-slip features to walkways.

 

Warranty

The product warranty is provided by Industrial Roof Coatings, the manufacturer of Roof Protect, that the product will perform as expected for a certain period after it is applied to the roof. The length and terms of the warranty can vary depending on the final product used.

Typically, an Industrial Roof Coatings product warranty will cover defects in the product, such as premature cracking or peeling, as well as the failure of the product to adhere correctly to the roof surface. However, the warranty may not cover damage or problems caused by external factors, such as storm damage, improper installation, animal or chemical damage, post-restoration building works or neglect. Previously painted roofs cannot be covered by warranty as Roof Protect would be adhering to other paint rather than the roof surface.

To qualify for the warranty, the product must be applied according to Industrial Roof Coatings’ instructions and by a qualified professional. The warranty may also require periodic inspections and maintenance to ensure the product performs as expected.

Suppose an issue arises with the Roof Protect during the warranty period. In that case, Industrial Roof Coatings will typically provide a remedy, which may include repair or replacement of the product up to the original purchase price. It’s essential to read and understand the terms of the warranty before purchasing a roof restoration product to ensure that you know what is covered and what is not.

Weight 16.5 kg
Dimensions 30 × 30 × 30 cm
This field is for validation purposes and should be left unchanged.