This thin milky clear coloured Primer is designed to be used on Concrete Tiles.
Its purpose is to provide a sticky surface for the Roof Refresh Membrane to adhere to, which will enhance the effectiveness of the final 2 coats of the Membrane.
About The Product
The Roof Refresh Ozprime is expertly formulated using a highly adhesive acrylic resin, making it an ideal solution for sound tile surfaces before application of Roof Refresh.
Ozprime is engineered to deliver superior results, enhancing the tile surface’s overall performance and extending its lifespan.
Designed For
Concrete Tiled Roofs
Coverage
The coverage can vary depending on the state of the tile, but approximately from six to nine square metres per litre. It’s available in 20 litre drums.
Clean Up
OzPrime is easily cleaned up using water.
Install
- Inspection: A professional will inspect the roof to determine its condition and identify any issues or areas that require attention.
-
Cleaning: The roof will be thoroughly cleaned using a high-pressure cleaner to remove dirt, debris, and other contaminants. This process may include using anti-mould or other cleaning agents as needed.
-
Repairs: Any damaged areas or leaks will be repaired, such as replacing broken tiles, fixing flashing, repointing and resealing any gaps or cracks.
-
Priming: One coat of primer may be applied to the surface to ensure good adhesion of the coating.
-
Coating: 2 coats of Roof Refresh roof coating will be applied to the surface using airless spray equipment, ensuring the coating is applied evenly and in the correct thickness.
-
Finishing touches: Once the coating is applied, any necessary finishing touches will be made, such as painting trim and flashing or adding anti-slip features to walkways.
Warranty
The product warranty is provided by Industrial Roof Coatings, the manufacturer of Roof Refresh, that the product will perform as expected for a certain period after it is applied to the roof. The length and terms of the warranty can vary depending on the final product used.
Typically, an Industrial Roof Coatings product warranty will cover defects in the product, such as premature cracking or peeling, as well as the failure of the product to adhere correctly to the roof surface. However, the warranty may not cover damage or problems caused by external factors, such as storm damage, improper installation, animal or chemical damage, post-restoration building works or neglect. Previously painted roofs cannot be covered by warranty as Roof Refresh would be adhering to other paint rather than the roof surface.
To qualify for the warranty, the product must be applied according to Industrial Roof Coatings’ instructions and by an Accredited Applicator and qualified professional. The warranty may also require periodic inspections and maintenance to ensure the product performs as expected.
Suppose an issue arises with the Roof Refresh during the warranty period. In that case, Industrial Roof Coatings will typically provide a remedy, which may include repair or replacement of the product up to the original purchase price. It’s essential to read and understand the terms of the warranty before purchasing a roof restoration product to ensure that you know what is covered and what is not.
